Alçıpan Bölme Duvar

drywall partition system

drywall partition system is a non-load-bearing, lightweight, easy-to-build, solid drywall alternative that meets the practical and performance requirements of building and maintenance projects in both commercial and residential areas. These boards are rapidly replacing traditional concrete wall structures as a reliable, safe, practical and cost-effective alternative.

What Are Drywall Partition Wall Partitions

drywall partition system design achieves an important application in architecture and design. These partitions, commonly referred to as drywalls, are made by successfully sandwiching gypsum plaster between two sheets of thick paper.

Why Should You Use Drywall Partitions?

Many times it has been seen that people use brick or plywood for the construction of a new interior wall. An easy alternative today is the installation of drywall panel partition walls, saving you all the expense and dirty work of fresh build. Drywall has a tremendous edge over wooden boards as they are safer and fire resistant. Similarly, compared to heavy brick wall, these plaster walls greatly reduce the weight of the building. In addition, its thermal and acoustic insulation properties help create a safe and quiet environment.

Benefits of Building a Drywall Partition System

• Sound transmission is a huge consideration when designing a building today. Transfer of noise to adjacent areas should be prevented. It is very easy to curb sound transmission with a plasterboard partition wall and creates a pleasant environment.
• It is extremely easy to install. They can be drilled easily and can also be used in a number of ceiling designs today. They can also be installed at much lower labor costs compared to other materials.
• They are light and show fire resistance properties.
• They produce a minimum amount of waste and construction residues and are easy to install, following the assembly technology.
• Drywall Partition System is very smooth. The surfaces can be easily painted or appropriate wallpaper can be applied to the wall to enhance its overall appearance.

Install Drywall PartitonSystem Wall Boards for Striking and Aesthetics

Drywall Partition Wall Partitions made in the interior fulfill a wide range of architectural demands for design. Their performance and ease of application, plentiful usability, effortless repair and effective compatibility with almost all forms of interior decoration combine to make these partition walls a unique product.

Drywall Types

What types of plasterboards are there?

Gypsum boards can be divided into the following main categories according to their performance:

• Drywalls providing fire performance
• Gypsum boards providing acoustic or sound performance
• Drywalls providing thermal performance
• Perforated plasterboards providing acoustic performance with aesthetic design, often used in atriums, foyers, restaurants and other environments where sound reverberation is a problem
• Gypsum boards providing impact resistance
• Gypsum boards to help control steam, humidity and water
• There are also a limited number of drywall suitable for sheathing purposes - such as Air Defense -

Drywall Wall

Drywall partition walls are one of the most frequently used wall applications in the interior areas of buildings. Drywall partition walls can be applied to metal or wooden construction by screwing drywall panels of different sizes. The use of plasterboard partition walls in buildings has many advantages. Ease of use is one of these advantages. In addition, drywall partition walls are highly insulated against heat and sound. We can list other advantages as follows.

1- It is very resistant to fire.

2- It has the same value as Human in terms of PH value and there is no bacterial production.

3- Gypsum board partition walls have a light and flexible structure and are very practical in terms of assembly and therefore can provide fast solutions.

4- There is no risk of explosion in case of possible disasters such as earthquakes.

As with every building element, there is a standard for plasterboard partition walls . Drywall panels are produced according to TS-452 and DIN-18180 standards. All plasterboard partition walls produced in factories are produced in accordance with these standards and offered to customers. KNAUF, which has been in the drywall partition industry for many years, is constantly trying to offer the best product to replace products and production line, according to customer feedback.

The use of plasterboard partition walls is generally used indoors in residential areas, office areas, shopping malls, hospitals and schools. Since it can be applied in a very short time, it can be easily used in preferred plasterboard partition walls, wall cladding, suspended ceiling and steel column cladding. As you can see, the drywall partition wall is a material that you can encounter in almost any area.

If you need a plaster wall application, it is best to consult experts in this field. If you cannot find such people around you, you can also get service from us. We should state that we are a company and a company, as well as a project and implementing company. As with every building material, it is very important where and under what conditions the material will be used in order to benefit from the application for a long time. As it stands, it is important to know where and for what purpose. If a certain weight is to be carried on a thick plasterboard partition wall, a thin plasterboard will be sufficient if a coating is to be made. This is directly proportional to your usage.

At the same time, the quality of the application is at least as important as the quality of the material of the product. We recommend working with specialist companies such as drywall partition walls . However, a professional will recommend you the right product and make the right application. A thin or thick drywall partition wall will suffer from the price of the material because it is too thick or too thick. We are under a single task with our experienced staff in the field. Our customers who prefer us know very well that we offer the right products to our customers at the best price. In this way, we always keep customer satisfaction at the highest level. In addition to the developing technology , the plasterboard partition wall continues to develop in the sector. We are constantly improving our team and equipment by closely following the innovations related to our sector, not only in our country but also all over the world. However, companies that can do this will be successful in the real sense as well as in the sector.

During the construction of plasterboard partition walls , water and heat resistant plasterboard is used. Drywall DU and DC profiles are used as profiles. Screws and dowels are also used to fix these profiles to the wall. In addition, trumpet screw, perforated corner profile, joint tape and filler are used. As you can see, more than one material is used during an application. Drywall panels should be durable and durable with the same quality as other application materials. Of course, with these materials, the most important factor is the practitioner's experience and mastery in this field. While drywall partition system can be turned into a masterpiece in the hands of the master, those who do not understand this work can have huge problems. You can call us for all your questions and needs about plasterboard partition system .

Drywall Partition System Models

Drywall is among the most preferred due to its practical use of materials and labor costs, less wall application. All kinds of interior plasterboard partition walls can be easily used. The important thing here is the plaster used correctly in the right areas. For this reason, the right choice among plasterboard wall partition plaster models is very important. In this way, you get maximum efficiency from your plasterboard partition system . The plasterboard partition between the front wall models does not have information about which one to use if you can get help from our experts. As a plasterboard partition wall manufacturer, our company also serves as an applicator.

We can say that the models are divided into two main plasterboard partition systems . The first of these is a drywall partition with a metal frame with a wooden frame, the second with a metal frame. Metal framed plasterboard partition walls show the area that can be used easily in all areas such as residences, workplaces, meeting rooms, hotels, hospitals, that is, the need compartment. Metal frame drywall partition walls are divided into five basic types of meaning. This is single-layer drywall partition, double-layer plasterboard partition, three-layer plasterboard partition , single-column structures, double-column structures. Wood framed drywall partitions can be used in similar applications as metal framed drywall partitions . These are divided into two.

Wall partition gypsum board provides general information about what is required if the average thickness of a single-coated gypsum board partition is 7.5 cm d. Width and height 250 cm 120 cm d. The plasterboard thickness is 12.5 mm. It should be known whether the plasterboard partition wall between the load-bearing systems is a building. Building, as the name suggests, drywall partitions are a structural member that helps square certain sections according to the intended use. Apart from that, each model has a certain thickness and bearing capacity, but it should never be confused with the main structural system of building bearing beams.

Drywall partition system models can vary according to the needs of the general structure and the complete use of the building. It should be noted that the portability feature of plasterboard partitions is useful for different sections if desired. In this way, very comfortable sections can be created as desired, especially thanks to its large area and low cost feature. Especially in our country, where drywall partition walls of large shopping malls have been built rapidly in recent years, it is very useful. The stores in the shopping center can be created at the desired level in a very short time. In addition, plasterboard partitions can be provided for the manufacturer and, as we mentioned above, model plasterboard partition walls can be produced in the desired size. This is directly proportional to the wishes of our customers. Drywall is also for decorative products that these interior architects often use in building applications. For a drywall partition, your environment can feel very different. Project approved works are drawn and forwarded to us. Our factory carefully transported plasterboard partition systems are carefully delivered to the address. Partitions are assembled here again flawlessly with our professional craftsmen in the region.

Plaster Wall

All of the work we have done, we never compromise on the quality of de-mar drywall office partition systems . Especially in these materials and applications used in the building, the slightest mistake can lead to undesirable accidents. It is controlled by professional people at all stages of both the delivery of the raw materials and the application and application process from the entrance to the factory. These small and big checks in the whole process are done with the same discipline. We owe our success to this discipline. We help all of our customers with the same quality without making a distinction. In this way, we believe that we are an example for our industry, as we ensure our own continuity. If you want to get more about plasterboard partition system models easily, you can call our company without hesitation.