Insulated Drywall 3

Insulated Drywall 3

Insulated Drywall 3 Acoustic Wall Panels 46dB Reduction - 1.2m x 1.2m x 27mm

Insulated Drywall 3 is a direct-to-wall acoustic soundproofing sheet, ideal for moderate levels of noise such as normal conversation or background TV/music noise in adjacent rooms. They are high-density gypsum-based sheets with a higher mass than standard gypsum board.

With 23.83 kg per panel and 3 different layers of soundproofing laminated to each other, Insulated Drywall 3 adds a dampening layer to your wall to prevent mass and sound energy / vibration from passing through.

How to install Insulated Drywall 3

Whether you are a competent application enthusiast or planning to use a local tradesman, Insulated Drywall 3 is an easy to install system and can be directly applied to any flat/flat surface with 9 fixings per panel, leaving a 5mm gap around the perimeter and then an acoustical around the perimeter to prevent side vibration. sealed with sealant. (43-45mm drywall screws). The final layer of acoustic gypsum board means this board will be ready for a final decoration.

We recommend using the caulking gun for use with acoustic sealant and sealant around the slab to avoid any possible sound leak spots.

Each board weighs 23.83 kg and therefore requires two people to lift it. Also, due to the weight of the slabs, you may want to seek the opinion of a structural engineer first to see if these slabs are suitable for use with the existing structure.

Example structure 1- 46dB
Single brick wall with Insulated Drywall 3 24mm mechanically fixed with 9 screws per board.

Example
, 15mm acoustic gypsum board on both sides and 50mm RW3 mineral wool between studs and 2-48dB 50mm stud framing with Insulated Drywall 3 on one side only.

This can vary depending on the material the board is installed on and the overall construction of the wall or ceiling. If you would like more information on how the reduction in your sound accumulation will be affected, please do not hesitate to contact us at +90 216 499 0892 to discuss.

Features and Benefits

• Improves airborne sound performance.
• It is suitable for use on solid or erect walls.
• It is supplied in thin, easy-to-handle sheets and can be field cut.
• Cost effective.
• Simple to install
• Withstands more load stabilization than standard plasterboard.

Features

Length: 1.2m.

Width: 1.2m.

Thickness: 27mm.

Panel size: 1.2m2.

Panel edge: tapered edge.

Weight: 28.6 kg